|
Home Preservation Systems has independent testing performed on its products to verify certain qualities and characteristics. DL Laboratories, in Brooklyn, New York, is considered one of the best independent, accredited testing laboratories in the nation. They were selected by Home Preservation Systems to conduct product testing, the results of which are provided below.
A key factor in choosing a coating for your home is its ability to breathe, or allow water vapor to pass through the coating. According to DL Laboratories, the "water vapor permeance" or breathability is exceptional. We are extremely proud that we have been able to achieve this level of breathability and at the same time pass the rigorous 98 mile per hour wind driven rain test.
Choose Home Preservation Systems for your premium home improvement products. There are no better products on the market today.
| TEST PERFORMED |
TESTING METHOD USED |
TEST RESULT |
EXTREME PERFORMANCE COATING SYSTEM BENEFIT |
| Moisture Vapor Transmission Rate (BREATHABILITY) |
ASTM D 1653 Method B Total System Water Vapor Permeance |
50.4 Perms |
Exceptional breathability allowing water vapor to pass through the Coating System |
| RESISTANCE TO WIND DRIVEN RAIN |
ASTM D 7088 |
Water Leaks/None Rear Face Dampness/None |
Waterproof at 98 MPH Wind Driven Rain Test for 24 hours exposure |
| COLD WEATHER FLEXIBILITY |
ASTM D 522 |
PASSES 1/8TH inch diameter bend at minus 18� C |
Excellent cold weather flexibility |
| ELONGATION |
ASTM D 2370 |
Elongation at break 125% |
Flexible to reduce cracking |
| Tensile Strength |
ASTM D 2370 |
495 Pounds per square inch |
Coating system toughness |
Extreme Performance Coating Technical Data |
| TEST PERFORMED |
TESTING METHOD USED |
TEST RESULT |
EXTREME PERFORMANCE COATING SYSTEM BENEFIT |
| Viscosity |
ASTM D 562 |
+/- 98 Kreb Units |
Thick and creamy consistancy |
| Sag Resistance |
ASTM D 4400 25-30 |
Mils @ 60% Relative Humidity, 75�F |
Easy to apply thick coats |
| Sheen |
ASTM D 523 |
10 - 12 @ 60 degree angle |
Soft, satin finish |
| VOC |
ASTM D 3960 |
109 Grams per liter |
Meets and Exceeds EPA Guidelines |
|